$2699
Dual-Lug Stainless Steel
C3 Carbon
Starting at 6.3 Lbs
The Fierce Carbon Rival XP 2.0 is built for hardcore hunters who want a full carbon barrel and stock platform without stepping up to a titanium action. Pairing a Dual-Lug Stainless Steel Action with a C3 Match Grade Carbon Barrel and Rival XP 2.0 C3 Carbon Stock, it delivers the same Fierce accuracy standard — a strict .5 MOA guarantee — starting at 6.3 lbs and $2,699.
The TriggerTech Primary Pro comes set at 2.5 lbs and adjusts from 1.5 to 4 lbs. An integrated ARCA rail, Picatinny rail, and push-button adjustable cheekpiece are built into the stock, with QD flush cups and the XP Detachable Mag Box rounding out the field-ready setup. Available in 11 calibers from .22 Creedmoor and 6.5 Creedmoor to 7mm PRC, .300 RUM, and .300 PRC.
Technical Sheet
Bolt/Action
- Dual-Lug Stainless-Steel Action
- 70 Degree
- Spiral-Fluted Bolt
- DLC Coating
Trigger
- Trigger Tech Primary Pro Curved
- Proprietary smooth trigger face
- Trigger set at 2.5lbs.
- Adjustable between 1.5-4lbs.
Stock
- Rival XP 2.0 C3 Carbon Fiber Stock
- LR negative comb design
- Integrated ARCA and Picatinny Rail
- Push-Button Adjustable Cheek Rest
- Lightweight, Sleek and Ergonomic
Barrel
- .5 MOA ACCURACY GUARANTEE
- Fierce C3 Match Grade Carbon Barrel
- NIX Brake
Weight
Starting at 6.3 Lbs.
Additional Features
- Streamlined caliber selection
- QD flush cup mounts
- XP Detachable Mag Box
CALIBER SPECS
| CALIBER | BARREL | TWIST |
|---|---|---|
| .22 CREEDMOOR | 18" | 22" | 1/8 |
| 6 CREEDMOOR | 18" | 22" | 1/8 |
| .25 CREEDMOOR | 20" | 22" | 1/7.5 |
| 6.5 CREEDMOOR | 20" | 1/8 |
| .308 WIN | 18" | 1/10 |
| 6.5 PRC | 20" | 22" | 1/8 |
| 280 ACKLEY IMPROVED | 22" | 1/8.5 |
| 7MM BACKCOUNTRY | 20" | 1/8 |
| 7MM PRC | 20" | 22" | 1/8 |
| .300 RUM | 24" | 1/9 |
| .300 PRC | 22" | 1/9 |
Carbon Rival — Frequently Asked Questions
Models & Specs
The 2.0 features a redesigned stock with an integrated ARCA rail and a slightly slimmer palm swell. The underlying action / barrel setup is otherwise the same platform.
Yes — the Rival XP 2.0 adjustable stock is compatible with the original Carbon Rival and can be swapped in without needing new bottom metal (assuming you're already on a detachable-mag / XP configuration). Note: if your original rifle used the older fixed floor-plate design rather than XP, converting to the detachable-mag setup does require a new stock, bottom metal, and magazine (~$875 — see below).
5/8×24 (confirmed on a 22 Creedmoor build with a 20" barrel).
A Trigger Tech trigger, which Fierce has used across their line for several years.
No — that's an intentional textured clear coat finish, not a flaw.
Calibers & Custom Options
Yes, through the custom shop, for an additional $250 fee. Note: the 6.8 Western chambering is only guaranteed to 1 MOA, not the standard sub-¾ MOA guarantee used on other calibers — this has caused some confusion since it isn't always clearly flagged during ordering.
The typical guarantee is sub-¾ MOA, but certain calibers built through the custom shop (like 6.8 Western) carry a looser 1 MOA guarantee instead. No paper target / group is shipped with the rifle as proof — the guarantee is a service commitment, not an included certificate.
Pricing & Lead Times
Roughly 2 months for a fully custom build; in-stock rifles can ship immediately. One quote cited 8–10 weeks for a from-scratch build during a busier period.
Approximately 2–3 months as a general estimate.
Accessories & Maintenance
For US customers, ask sales directly for current recommendations. For Canadian customers, Fierce has referred these questions to their Canadian representative, who can help source components and provide installation guidance.
Fierce recommends Hoppe's Bore Foam: fill the bore with foam, let sit 5–6 minutes, then run dry patches through with a jag.
The short-action 22CM XP magazine (AICS-compatible).
Yes — the Rival stock with drop-box magazine kit is a common recommended upgrade path; ask sales for current pricing (has been quoted around $875 depending on caliber / timing).
